News

  • 0
  • 0

Introduction to Titanium Carbide TiC Powder

A Brief Introduction Titanium Carbide TiC Powder

Titanium carbide, also known as TiC is a standard transition metal carbide, with a NaCl-type cube crystals, a high melting point, high hardness with a high Young's modus, excellent chemical stability, wear resistance and corrosion resistance, and excellent electrical conductivity and thermal conductivity. It has numerous applications and great potential in cutting tools for aerospace, components for aerospace, foam ceramics, wear-resistant coatings, and infrared radiation ceramics materials.

The applications for Titanium Carbide TiC Powder

1. Useful to make a variety of multiphase materials

Titanium carbide-based ceramics are extremely hard tool materials, TiC and TiN along with WC, A12O along with other raw materials made of a variety of multiphase ceramics These ceramics have a extremely high melting points, high hardness as well as excellent chemical stability. is the material of choice for cutting tools, wear-resistant pieces however, they possess excellent electrical conductivity and are the most preferred material for electrodes.

Cutting tool material: Because of a certain percentage of TiC solid particle dispersion inside the matrix, composite cutting tools not only to improve the hardness and strength, but also to degree, increase the strength of the fracture, more than the standard cutting tools by a significant amount. A12o3-tic-tic-system ceramics can serve as armor materials. As a tool material, it has a higher hardness than (C N, C), and Ti(C N, C) because of N to make it on steel and other cutting materials friction coefficient is significantly reduced. This material has numerous advantages for cutting. Through the combination of the advantages of Ti and (C N, C) to form multiphase clays, a promising tools material can also be prepared.

2. They are also used for coatings.

Diamond coating: This production process of diamond tools uses most often the powder metallurgy impregnation method. Due to the high interfacial energy of diamond and common metal or alloy the diamond's surface cannot be affected by any alloy or metal with a melting point of low and bonding efficiency is not as good. In the last few years, many scholars have conducted a lot of study to enhance the strength of bonds between diamond and the metal matrix. The method of active metal is the one most frequently used approach, that is adding the tiny amount of titanium to the metal bond, vanadium or chromium. other active metals, tools for liquid phase sintering and the active metal is high carbon compounds are the basis of elements, and the affinity for diamonds is substantial, making it easy to increase the strength of the diamond surface in order to achieve the metallurgical mixture of metal bond and diamond. But, the strength of the interface is determined by the amount of active metal, sintering temp along with others, and needs for the breaking down of binder to realize the enrichment of active metal in the direction of the interface since this method isn't suitable for the hot pressing sintering of diamond and metal powder over a brief time solid phase.

3. This is the method used to prepare foam ceramics

In the capacity of a filter, ceramics remove inclusions in all types of fluids and its filtering mechanism is an agitation process and adsorption. This filter requires chemical durability of the material especially in the metallurgical industry that uses a high melting filter, and this type materials will oxide generally, but it also has the ability to adjust to the metal melt, which is the main goal for thermal shock resistant. Titanium carbide foams offer superior strength, harderness, electrical conductivity and heat, and heat and corrosion resistance that oxide foam ceramics.

4. For use in infrared radiation materials

Titanium carbide is an example of intermetallic compound, usually shows good chemical stability with having no change in valence as well as the system is operating under conditions of high-temperature decrease in the process of preparing specimens, the titanium ions have delay phenomenon to develop, which is a sign of the solid titanium ion melting into the structure of the cordierite the structure. This is followed by a change in the structure. Compared with a single material that is a single material, the radiation capability of the compound near 3tma is substantially improved, making it conducive to the application in the field of high temperature.

Main Manufacturer of Titanium Carbide TiC Powder

We are a reliable chemical material supplier and manufacturer with more than 12 years of experience in manufacturing high-end chemicals and Nanomaterials. They include silicon, nitride powder, magnesium sulfide powder, graphite, calcium nitride, 3D printing powder as well as other.

If you are looking for high-quality titanium carbide TiC granules Please feel free to get in touch with us and make an inquiry. (brad@ihpa.net)

Inquiry us

  • tags

Our Latest News

Precautions for import and export commodity inspection and biggest freight forwarders in the world

In international trade, the indirect and local inspection of import and export commodities is closely related to the vital interests of buyers and sellers, as it involves inspection rights, inspection agencies and related claims.…

Status of animal protection and biggest freight forwarders in international shipments

According to reports, a few days ago, a case about the alleged abuse of animals in livestock transportation ended in the captain's conviction, and the shipowner and the beneficiary cargo owner were not criminally punished.…

The sea freight export process and the latest status of the biggest freight forwarders in the world

FCL by sea is similar to LCL LCL, except that the FCL is self-picked up to the factory to compete for logistics warehouse packing, while LCL is to row the goods to the designated assembly yard competition warehouse, and the assembly yard will pick up…