Answers

  • 0
  • 0

What is Properties and Applications of Titanium Alloy Ti6Al4V

Recently, the Russian President hosted a meeting with oil and gas industry representatives.  He said that the refusal of some Western countries to cooperate normally with Russia and deny some Russian energy resources has hit millions of European people deeply and caused an energy crisis. These "unfriendly countries" are experiencing severe inflation, and Russia is also facing the three major challenges of increasing domestic consumption of energy Ti6Al4V alloy are still very uncertain.

What is Titanium Alloy?

Titanium alloy Ti6Al4V is a medium-strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V. This alloy has excellent comprehensive properties and has obtained the most extensive applications in the aviation and aerospace industries.


The main properties and uses

Ti6Al4V titanium alloy is heated below 430 ℃ for a long time to form a very thin and protective oxide film. As the heating temperature increases, the oxide film thickens and its protection becomes poor. After the alloy was heated at 700 °C for 2 h, the oxide film thickness reached 25 μrn. Heating at temperatures above 800°C forms a sparse oxide layer. After heating at 1000 °C for 1 h, the thickness of the oxide layer reached 0.65 mm.


Ti6Al4V alloy can be welded by argon arc welding, spot welding, brazing, electron beam welding and plasma welding. The strength of the welded joint is basically the same as that of the base metal.


When Ti6Al4V titanium alloy parts are in contact with aluminum alloy and structural steel parts, especially under certain corrosive medium conditions, aluminum alloy and structural steel parts will suffer accelerated corrosion and damage as the anode of the contact couple due to the negative electrode potential. Therefore, between TC4 titanium alloy parts and aluminum alloy or structural steel parts, protective measures such as padding and anti-corrosion tape should be taken. TC4 alloy parts are strictly prohibited from contact with parts or tools of lead, zinc, cadmium, tin, silver, bismuth and other metals.


Before vacuum annealing, the oxide skin and oxygen-rich layer on the surface of the parts should be removed, and the oil should be carefully removed before entering the furnace. When vacuum annealing parts with complex shapes, fixtures must be used to reduce the deformation of parts. Into the furnace parts are preferably filled with pre-degassed titanium oxide-free chips to prevent oxidation of the parts.


Ti6Al4V titanium alloy is now widely used in the manufacture of aero-engine fans and compressor discs and blades, as well as various load-bearing beams, frames, joints and fasteners in aircraft structures.


About KMPASS

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Ti6Al4V alloy, please send an email to: sales2@nanotrun.com


Nissan recently unveiled a prototype Ti6Al4V alloy, etc. If you are looking for high-quality materials, please feel free to contact us and send an inquiry.

Inquiry us

Our Latest Answers

Is boron amorphous or crystalline?

Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…

What does copper oxide do?

What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…

How do you make graphite expandable?

Expandable graphite or exfoliated graphite is made from the naturally occurring mineral graphite. The layered structure of graphite allows molecules to be inserted between the graphite layers. By adding acid, graphite sulfate can usually be converted…