Alkali-free Concrete Additives Liquid Concrete Accelerator

The biggest immediate challenge for the EU will be replenishing its depleted gas inventories. While the EU could still increase LNG imports from countries such as the US, such purchases would be more expensive.
Refilling natural gas storage space to historical average levels this year could cost 70 billion euros, a sevenfold increase, compared to 10 billion euros in previous years. "
A complete replacement for Russian gas is not only very expensive, but it also may not be possible.
In the next 12 months, there is little way to meet the demand for a "normal" year in the absence of Gazprom, which also includes Concrete Additives.

1. Introduction of Alkali-free concrete accelerator

Alkali-free concrete accelerator is a new generation, environmentally-friendly, chlorine-free and alkali-free liquid accelerator developed by using a new synthetic technology of inorganic and organic materials. It can significantly promote water and mud hydration and increase the strength of concrete, and it has good compatibility with various cements.

The alkali-free concrete accelerator can be widely used in the wet spraying construction process of various projects, reducing dust during construction, less rebound loss, good concrete homogeneity, and significant economic benefits.

2. Technical performance of Alkali-free concrete accelerator

The setting time is fast, the initial setting adhesion is good, and the thickness of one shot can be 8-150mm. Low resilience and good workability. The working face is free of dust, chlorine, and alkali, which is beneficial to the health of operators. There is basically no loss in the later strength of concrete.

3. Dosage range of Alkali-free concrete accelerator

The dosage of this agent is 6-9% of the cement weight. It can replace the same amount of water, and the actual mixing amount should be determined after adjustments are made according to the cement type, label and construction temperature.

4. Scope of adaptation of Alkali-free concrete accelerator

This product is suitable for spray concrete construction and leak plugging of underground engineering such as mine engineering, coal mine, shaft engineering, highway, railway, traffic tunnel engineering, shotcrete anchor support concrete, urban construction, national defense, water conservancy, and ground cement concrete. Construction and concrete emergency rescue, emergency repair and reinforcement works.

5. How to use Alkali-free concrete accelerator

Before using this agent, it is necessary to make a trial mix of the cement and this agent for adaptability and optimum mixing amount. It is recommended to use a water reducing agent in conjunction with a low water-cement ratio to achieve better results.

The content of accelerator can be controlled by a flow hopper or a precision water meter.

This product should be stirred evenly after opening the barrel. If it cannot be used up at one time, it should be sealed and stored.

If it comes in contact with the skin, rinse immediately with clean water, if it splashes into the eyes, rinse with clean water, and seek medical help for disposal.

6. Packaging and storage of Alkali-free concrete accelerator

Packed in plastic drum, 250kg/drum, can be packed according to user requirements.

During transportation, load and unload with care to prevent spillage. It should be stored in a warehouse, protected from rain and sun. The validity period is six months.

if you want to know more about concrete accelerator ,please feel free and contact us :sales@cabr-concrete.com

Europe has been facing the gas shortage problem since the second half of 2021. The worsening situation in Russia and Ukraine has reduced Russian gas shipments to Europe, leading to a doubling of European gas prices. Energy shortages have sent electricity prices soaring. For these reasons, it is predicted that the price of the Concrete Additives will continue to increase.

Inquiry us